Max865 datasheet 7404
Dap plastic wood msds sheet
High Frequency Switch Mode Li-Ion Battery Charger ADP3806 Rev. C Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Product data sheet Rev. 7 — 19 November 2015 4 of 20 Nexperia 74HC14; 74HCT14 Hex inverting Schmitt trigger 8. Limiting values Table 4. Limiting values  The input and output voltage ratings may be exceeded if the input and output current ratings are observed.  For SO14 package: Ptot derates linearly with 8 mW/K above 70 C. Maxim Integrated MAX17222/MAX17225 Boost Converters are an ultra-low quiescent current boost (step-up) DC-DC converter with a 0.5A peak inductor current limit and True Shutdown™. True Shutdown disconnects the output from the input with no forward or reverse current. The output voltage is ...
Ios 9 tren iphone 4s.pl
The MAX481, MAX483, MAX485, MAX487–MAX491, and MAX1487 are low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. Dec 24, 2018 · This device contains six independent gates each of which performs the logic INVERT function. The operating voltage is 5V, high-level input voltage is 2V, and low-level input is 0.8V. original 7400-series integrated circuits were made by Texas Instruments with the prefix “SN” to create the name SN74xx.
Ni 9219 sample rate sheet
The MAX865 is a CMOS charge-pump DC-DC convert- er in an ultra-small µMAX package. It produces positive and negative outputs from a single positive input, and requires only four capacitors. The charge pump first doubles the input voltage, then inverts the doubled volt- age.
MAX7404ESA+ Maxim Integrated Active Filters 8th-Order Lowpass Elliptic Filter datasheet, inventory, & pricing. The MIC2920 is available in several conﬁgurations. The MIC2920A-x.x devices are three pin ﬁxed voltage regulators available in 3.3V, 4.85V, 5V, and 12V outputs ... General Description The MAX6966/MAX6967 serial-interfaced peripherals provide microprocessors with 10 I/O ports rated to 7V. Each port can be individually configured as either: The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communica-tions interfaces, particularly applications where ±12V is not available. These parts are especially useful in battery-powered sys-tems, since their low-power shutdown mode reduces power dissipation to less than 5µW. The MAX225,
All the part names for which the file 375318_DS.pdf is a datasheet